Non-Slam Check Valve

Non-Slam Check Valve

You are here: Home » Products » Non-Slam Check Valve
Non-Slam Check Valve

CONTACT DATIAN

For further information, pricing or a brochure, please use the following link:

Category : Check Valve. Tags : check valve

Non-Slam Check Valve

Product Description

  • Nozzle check valve or Non slam check Valve meets these basic
  • requirements and incorporates these additional features:
  • Non-slamming – valve closes prior to reverse flow
  • Short stroke length reduces closure time and
  • minimizes water hammer
  • Metal-to-Metal sealing or Resilient Seated Design
  • Conical seating surface is self-aligning and provides tight shut-off
  • Minimum pressure loss with excellent dynamic performance
  • Spring loaded disc design allows mounting in any orientation, vertical flow down applications can also be met upon request
  • Scheduled maintenance
  • NON-SLAM, NOZZLE CHECK VALVE APPLICATIONS
  • Compressor discharge
  • Natural gas, refineries
  • Pump discharge
  • Critical equipment discharge
  • Compressor/pump bypass
  • Storage facilities
  • Offshore
  • Nuclear power plants
  • NON-SLAM, NOZZLE CHECK VALVE Featured as below:
  • Small bore valve designed for use in piping systems from 1 in. (25 mm) to
  • 10 in. (250 mm) diameter. This size range allows the use of a simple, streamlined, in-line check design
  • which is quick to respond to changes in velocity.
  • Non-Slam Closure
  • Metal Seating
  • Extremely Quick Closure
  • Spring Loaded disc design allows mounting in any orientation
  • Low Pressure Loss
  • No Scheduled Maintenance
  • Available in both Flanged and Wafer Type Design
  • Design & Manufactured in Both Short Pattern and API 6D F-F Dimensions.
  • Standards Compliance: BS 1868, ASME B16.34,GB 12235-89
  • Face to Face Dimension: MANUFACTURE STANDARDS
  • Inspect & Test: API 598/6D Size Range: 2″ to 42″N.B.
  • Pressure Ratings: PN6, PN16, ANSI150, 300, 600, 900 & 1500
  • Materials Available in: WCB,LCB,CF8,CF8M,CF3,CF3M,WC6,WC9, C5,C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.

Related Products