Automatic Recycle Valve Technical Article

Automatic Recycle Valve

You are here: Home » Technical Article » Automatic Recycle Valve

automatic recirculation valves start up

17 May 2016  /  in Automatic Recycle Valve Technical Article

Before the valve is shipped all connections (flanges or weld connection.) are covered with plastic caps. This way the valve internals are protected against the ingress of dirt and damage.
Read more →

Automatic Recirculation Valve Installation And Maintenance

17 May 2016  /  in Automatic Recycle Valve Technical Article

Before the valve is shipped all connections (flanges or weld connection.) are covered with plastic caps. This way the valve internals are protected against the ingress of dirt and damage.
Read more →

Pump Run Out Protection

16 Sep 2014  /  in Automatic Recycle Valve Technical Article

Normally pump protection valves are limited to minimum flow protection; however, severe damage can occur to the pump and driver by exceeding the intended operating range of the pump.
Read more →

Applications of DATIAN ARC valve

Pump Run Out Protection

16 Sep 2014  /  in Automatic Recycle Valve Technical Article

Datian Valves is one of the world's leading manufacturer of automatic recirculation valve and other protective pump fittings. Our customers rely on our extensive experience in the development and production of high quality valves.
Read more →

Automatic Recirculation Valves Installation

Automatic Recirculation Valves Installation

03 Jun 2014  /  in Automatic Recycle Valve Technical Article

The DATIAN automatic recirculation valves are best installed directly on the outlet of the pumps for which they are meant. The valve layout is mainly based on the pump curve. Ensure that the valves are installed on the right pumps. The flow direction is indicated on the valve nameplate. This nameplate is riveted to the valve body. On this ...
Read more →