Loading...

ZARD Electric Adjustment Type Butterfly Valve

ZARD Electric Adjustment Type Butterfly Valve adopting intelligent control, can adopt electric or pneumatic actuator to realize adjustment of pressure, flow, temperature, liquid level . It has compact structure, strong function, small volume ,good seal, good performance, simply assort, large flow and other features to be suited for slabby, including partical ,fibre medium. It is suitable for automatic control system of food, environmental protective , light industry , petroleum , pepar marking, chemical , teaching and scientific research equipment, electric and other industry now.

Standard specification

Body type: Flat casting molding
Disk type: Triple eccentric butterfly
Nominal diameter: DN50 ~600 NPS 2〞~24〞
Nominal pressure: PN16—64 Class 150LB
Connection: flange: Flange, Wafer
Bonnet type: Whole piece
Packing: V type PTFE, Flexible graphite
Seal gasket: Metal clip graphite
Actuator: Pneumatic : Pneumatic: Pneumatic piston actuator, pneumatic diaphragm actuator
Electric: DTR series, 3810 series
Electric: DTR series, 3810 series
Surface painting: Green color, acrylic acid polyurthene ceramic paint.

Model Establishmen

Z Actuator R Structure type Nominal pressure Body material Nominal diameter
Z series control valve D:Electric  DTR series
R:Electric 3810 series
R Rotary D: Standard type
hard seal adjustment
DF: Soft seal
adjustment
PN16=16
CL150LB=
150 LB
C=WCB
LC=LCB
P=CF8
PL=CF3
R=CF8M
RL=CF3M
D=Special material
DN50= DN50
NPS2〞=NPS2〞
Such as: Pneumatic piston hard seal adjustment butterfly valve, Pressure PN16, Body material WCB, Nominal diameter DN100.Type is ZSRD-16C DN100

Performancen

Flow characteristic Approximate equal percentage
Adjustable range 50:1  
Rated CV figure  Full champter CV 85~20500
Travel Full open 90° Adjustment 0-70°
Allowance leakage Hard seal:IV(0.01% Valve rated volume) Soft seal:VI(Bubble classs)
intrinsic error % Pneumatic ±2 Electric ±2.0
Hystersis % Pneumatic ≤1.5 Electric ≤1.0
Dead zone % Pneumatic ≤0.6 Electric ≤1.0
Note :Parameters in performance sheet is based on the control valve with positioner and PTFE packing .

Selected parameter

Nominal diameter DN(mm) 50 65 80 100 125 150 200 250 300 350 400 450 500 600
Rated flow series Cv 85 180 240 390 690 1000 1760 3390 4730 6700 8900 10500 14800 20500
PTFE packing, metal seal allow different pressure Unit: MPa
Double action pneumatic actuator     1.45 0.54 0.79 0.42 0.34 0.1 0.27 0.17 0.12 0.19 0.11 0.04
Single action pneumatic actuator     0.82 0.38 0.5 0.44 0.33 0.19 0.38 0.16 0.14 0.14 0.12 0.11

Actuator

  Model/ Type Pneumatic piston actuator Full electric type electric actuator
At series  3810R series
Single action, double action Built-in control box type intelligent integration
Usage Adjustable, on-off Adjustable
Air supply pressure or supply electric voltage Supply gas pressure( spring scope) 400 Kpa G Power: AC 200V±10%  50Hz
Or power: AC 380V±10% 50Hz
Connector  Gas tube connector气管接头:RC1/4 Normal type:wire intake 2-PF(G1/2〞)
Exd: Installing protective sleeve PF(G3/4〞)
Direct action Gas pressure increase disk anti-clockwise rotaion,valve close Input signal increase disk anti-clockwise rotation, valve close
Re-action Gas pressure increase disk clockwise rotaion,valve open Input signal increase disk clockwise rotation, valve open
Input signal 40~20mA.DC(with electric pneumatic valve positioner Input /output: 4~20mA.DC
lag ≤1%FS(with positioner) ≤0.8%FS
Linearity 2%FS(with positioner) +1%FS
Working temperature -10℃~+70℃ Standard: -10℃~+60℃
With spacer heating: : -35℃~+60℃
Exd: -10℃~+40℃
Coating Green, acrylic polyurethane enamel Blue, acrylic polyurethane enamel
Option parts Electric-Pneumatic (Pneumatic-pneumatic)valve positioner,LFT, Valve position transmitter, solenoid valve, limited switch Space heater (normal type)
Note : Not standard configuration, need to be stated before order.

The following is our product catalogue, company profile, qualification certificates and other related documents