- Lift Spring Loaded Disc Design
- Bolted Cover
- Internal Hinge Pin Design Standard
- Through-body Hinge Pin Design Available
- Renewable Seat
- Flanged or Butt-welding Ends
- One-way flow Control
STANDARDS OF LIFT CHECK VALVE
- Design&Manufacture: API 6D, BS 1868, ASME B16.34
- Face to Face: API 6D, ASME B16.10, EN 558
- Connection End: ASME B16.5, ASME B16.25, EN 1092, JIS B2220
- Test and Inspection: API 6D, EN 12266, API 598, BS 6755
- Sizes: 2″ – 36″ or DN50 – DN900
- Pressure Rating: Class150 – Class2500 or PN16 – PN420
- Material of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.
Lift/Piston Check Valve Lift check valves are also called piston check valves. They are essentially globe valves without the stem and top works, allowing the disc to respond to flow rates and direction. The disc has linear movement and is typically body-guided with conical seating surfaces. Springs can be added above the disc to provide more closure force when the disc returns to its closed position. Some manufacturers include externally attached equalizer piping to increase the disc opening with lower flows. The equalizer pipe is an open-pressure communication device that maintains equal pressure above the disc and in the piping downstream of the disc.
Depending on the valve body configuration (Y-pattern, angle, or T-pattern), the pressure drop could be close to that of a tilting disc check valve or much higher. The disc of this check valve design is stable in an open position and can be used with a wide range of flow rates.