Wafer Soft Seal Butterfly Valve

Applicable Standards
Design & Manufacture: API 609, EN 593, AWWA C504
Face to Face Dimension: API 609, EN 558
End Connection: ASME B16.5, EN 1092
Test and Inspection: API 598, EN 12266
Sizes: 2″ – 48″ or DN50 – DN1200
Pressure Rating: Class150 or PN10 – PN16
Materials of Valve Body: GG25, A126 B, GGG40, A536, WCB, LCB, CF8, CF3, CF8M, CF3M, etc.
Operated by: Lever, Gear, Pneumatic, hydraulic and Electric actuator

Category:

Wafer Soft Seal Butterfly Valve uses the flexibility of a rubber seat, could easily achieve zero leakage, therefore is a widely applied valve in oilfield, agriculture, water & wastewater and mining industries. Due to its rubber lined body materials, it is usually used in low-pressure lines.
Wafer type is the common style of the butterfly valve and is less expensive than the lug type. The wafer butterfly valve is installed between two flanges. The valve is kept in place by using bolts or studs and nuts from flange to flange. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve.

FEATURES

  • Center Lined, Resilient Seat
  • Bi-Directional Sealing
  • Shutoff and Throttling Operation
  • Wafer Body Type, Lug Type or Flanged Type
Scroll to Top