Ball Valve

Pneumatic | Electric

Ball Valve Introduction

A ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter-turn (90 degrees) around its axis, the medium can flow through or is blocked. They are characterized by a long service life and provide a reliable sealing over the life span, even when the valve is not in use for a long time. As a result, they are more popular as a shut-off valve then, for example, the gate valve. Moreover, they are more resistant to contaminated media than most other types of valves. In special versions, ball valves are also used as a control valve. This application is less common due to the relatively limited accuracy of controlling the flow rate in comparison with other types of control valves. However, the ball valve also offers some advantages here.

ball valve, CS, FL

Design

Datian steel ball valves are designed manufactured to provide maximum service life and dependability. All ball valves are full ported and meet the design requirements of American Petroleum Institute Standard API 608&API 6D British standard BS5351 and generally conform to the American Society of Mechanical engineers standard ASME B16.34 valves are available in a complete range of body/bonnet materials and trims.

Rang of Materials

Standard body/bonnet materials include nine grades of carbon, low alloy, and stainless steel, for special applications they can be supplied in other grades of alloy and stainless steel. There's a full range of trim materials to match any service optional packing and gasket materials are available for a full range of service conditions.

applicable standards:

STEEL BALL VALVES API 608/API6D
STEEL BALL VALVES ISO 14313
FIRE SAFE, API 607
ANTI STATIC.API 608
STEEL VALVES.ASME B 16.34
FACE TO FACE ASME B16.10
END FLANGES.ASME B16.5
BUTTWELDING ENDS ASME B16.25
INSPECTION AND TEST, API 598/ API 6D

design description:

FULL PORT DESIGN
BG.BOLTED BONNET.SPLIT BODY
FLOATING BALL TYPE
BLOW-OUT PROOF STEM
FIRE DURABLE CONSTRUCTION
ANTI STATIC DEVICE
STOPPER DEVICE
ISO 5211 MOUNTING PAD
FLANGED OR BUTTWELDING ENDS
AVAILABLE WITH WG OPERATOR

Ball valve structure diagram

Available Modifications for Steel Valves

Trim changes

End connection modifications
Packing and gasket change
Operator mounting
Handwheel extensions

Pressure equalizing

As or fd
Customer specified coatings
Weld end bore changes
Oxygen&chlorinecleaning&packaging

ball-valve
Operating

Extended lever for easy operation, also available with gearing, motor actuators, pneumatic or hydraulic actuators for more difficult services

Body&Bonnet

Split or 3-piece, split body & bonnet for 12" &small.disassembles easily for repair components.

BORE

Full bore or reduced bore. the full-bore design provides exceptional flow control.

End Connections

A choice of flanged
RTJ flanged or butt-welding end for
piping flexibility.

Packing

Std packing multiple v-Teflon packing, combined with live loading, maintains packing compression under high-cycle and severe service applications. Graphite packing is used for high-temperature situations.

BPS

Blow-out proof stems A pressure-safe stem shoulder design that protects against failure under excess pressure.

AS

Anti statics. A metallic contact is always granted between ball and stem/body to discharge eventual statics build-up during service

FS

A choice of flanged
RTJ flanged or butt-welding end for
piping flexibility.

floating, cast steel ball valve

Applicable Standards:

● STEEL BALL VALVES API 608/API 6D
● STEEL BALL VALVES ISO 14313
● FIRE SAFE. API 607
● ANTI STATIC, API 608
● STEEL VALVES, ASME B16. 34
● FACE TO FACE ASME B16.10
● END FLANGES, ASME B16. 5
● BUTT WELDING ENDS ASME B16.25
● INSPECTION AND TEST, API 598/API 6D

Design description

● FULL PORT DESIGN
● BG.BOLTED BONNET.SPLIT BODY
● FLOATING BALL TYPE
● BLOW-OUT PROOF STEM
● FIRE DURABLE CONSTRUCTION
● ANTISTATIC DEVICE
● STOPPER DEVICE
● ISO 5211 MOUNTING PAD
● FLANGED OR BUTT WELDING ENDS
● AVAILABLE WITH WG OPERATOR

floating, cast steel ball valve

ball valve cs, tm

Design

Datian steel ball valves are designed manufactured to provide maximum servce life and dependabiity. All ball valves are full ported and meet the design requirements of American Petroleum Institute standard API 608&API 6D British standard bs 5351 and generally conform to American society ofmechanical Engineers standard ASME B16.34 valve are available in a complete range of body/bonnet materials and trims

Rang of Materials

Standard body/bonnet materials include nine grades of carbon, low alloy and stainless steel, for special applications they can be supplied in other grades of ally and stainless steel, there'sa full range of trim materials to match and service optional packing and gasket materials are available for a full range of service conditions.

Available Modifications For Steel Valves

Trim Changes
End Connection Modifications
Packing And Gasket Change
Operator Mounting
Handwheel Extensions

Pressure Equalizing
AS OR FD
Customer Specified Coatings
Weld End Bore Changes
Oxygen&Chlorine Cleaning&Packaging

Live Photos

Have Questions about our valves ?

Our professional valves engineers are waiting for your consultation.




THE LATEST

Why natural gas pipelines must use forged steel ball valves

The natural gas pipeline forged steel ball valve is a forged steel structure, which is especially suitable ...
Read More

Comparisons of Pneumatic Ball Valves and Electric Ball Valves

The pneumatic ball valve consists of the ball valve and the pneumatic actuator. It generally needs ...
Read More

Float Ball Valve design feature

BOW-OUT PROOF STEM For the purpose of preventing the stem from flying off resulting in ...
Read More
Scroll to Top