Check Valve

check Valve Introduction

Check valve is a kind of automatic valves, which can avoid medium refluence, pump and actuating motor reversal, and medium leakage. Check valve can also be used for the pipelines which is used to supply provision for the auxiliary system whose pressure may exceed the system pressure.

DATIAN's check valves:
API 594/6D/602, ASME B 16.34, ANSI, DIN 3840, BS 1868/1873, BS EN 1868, swing, lift, wafer, forged, Class 150 - 2500, 1/2 - 48 inch.

Check Valve

swing chieck valv, BB, CS

Design

Datian cast steel check valves are designed and manufactured to provide maximum service life and depend abilty.All check valves meet the design requirements of American Petroleum Institute standard API 600&6D.BSEN 13709 and generally conform to American Society of Mechanical Engineers standard AS ME B 16.34.
Valves are available in a complete range of body/cover materials and trims.

Rang of Materials

Standard body/cover materials include nine grades of carbon, low alloy and stainless steels, for special applications they can be supplied in other grades of alloy and stainless steel, there'sa full range of trim materials to match any service optional
packing and gasket materials are available for a full range of service conditions.

Available Modifications For Cast Steel Valves

● Trim changes
● End connection modifications
● Packing and gasket changes
● Operator mounting
● Handwheel extensions
● Pressure equalizing
● Customer specified coatings
● Weld end bore changes
● Oxygen&chlorine cleaning&packaging

HCU weighted mechanical accumulator

This design can be used to either dampen or assist
closing of the check valve disc depending on orientation.
by using the hydraulic control unit to buffer action the
disc, the valve opens at lower flowrates.

read more

SWING-CHIECK-VALV
[A] Eyebolt

For 150Lb-8”, 300Lb-8”,
600Lb-6”, 900Lb/1500Lb/
2500Lb-4” & over.

[B] BC

Bolted cover. welded cover and pressure
seal bonnet in services requiring frequent cycling or with high pressure/ temperature variations.

[C] End Connections

A choice of flanged, RTJ
flanged or butt welding
end for piping flexi bi ity.

[D] Body-to-Cover Joint

A male and female joint or tongue and groove joint is used 150Lbto600Lb valves.
Ring joint is used in the body to cover connection in900Lb & higher rated valves

[E] Outside Lever And Weight

All external hinge pin swing check valves 12 and smaller are available with an optional outside lever and weight, internal hinge available with all swing
check valves.

[F] Seat Rings

Separate heavyduty, full ported rings for easy maintenance.
Screwed or welded connection into body.

swing, cast steel check valve

Applicable Standards:

● STEEL CHECK VALVES, API6D
● STEEL CHECK VALVES, ISO 14313
● STEEL VALVES, AS ME B 16. 34
● D FACE TO FACE, AS ME B 16. 10
● D END FLANGES, AS ME B 16. 5
● BUTT WELDING ENDS, AS ME B 16. 25
● INSPECTION AND TEST, API 598/API6D

Design description:

● STEEL CHECK VALVES, API6D
● STEEL CHECK VALVES, ISO 14313
● STEEL VALVES, AS ME B 16. 34
● FACE TO FACE, AS ME B 16. 10
● END FLANGES, AS ME B 16. 5
● BUTT WELDING ENDS, AS ME B 16. 25
● INSPECTION AND TEST, API 598/API6D

swing, cast steel check valve

lift type cast steel check valve

Applicable Standards

● STEEL CHECK VALVES, B SEN 13709/API 600, J IS
● STEEL VALVES, AS ME B 16. 34
● FACE TO FACE, AS ME B 16.10, J IS
● END FLANGES, AS ME B 16.5, J IS
● BUTT WELDING ENDS, AS ME B 16. 25
● INSPECTION AND TEST, API 598

Design description

● BB.BOLTED BONNET
● LOOSE DISC, CHOICE OF PLUG OR BALL
● RENEWABLE SEAT RING
● HORIZONTAL SERVICE
● FLANGED OR BUTT WELDING ENDS

lift type cast steel check valve

pressure seal cast steel swing check valve

Applicable Standards

● STEEL CHECK VALVES, API 594/API6D
● STEEL CHECK VAL CES.ISO 14313
● STEEL VALVES, AS ME B 16. 34
● FACE TO FACE, AS ME B 16. 10
● END FLANGES.AS ME B 16. 5
● INSPECTION AND TEST, API 598

Design description

● PSB, PRESSURE SEAL BONNET
● FULLY POT
● RENEWABLE SEAT RINGS
● FLANGED OR BUTT WELDING ENDS

pressure seal cast steel swing check valve

butterfly dual-plate, cast steel check valve

Applicable Standards

● steel check valves, api 594/api6d
● steel check valves, iso 14313
● steel valves.as me b 16.34
● face to face.api 594
● end flanges, as me b 16.5
● inspection and test, api 598/ap16d

Design description

● one piece body
● butterfly swing type
● dual-plate disc, long-pattern
● renewable split disc
● horizontal or vertical service
● wafer ends
● available with flanged ends

BUTTERFLY DUAL-PLATE, CAST STEEL CHECK VALVE

wafer lift type-plate cast steel check valve

Applicable Standards

● STEEL CHECK VALVES, API 594
● STEEL CHECK VALVES, ISO 14313
● END FLANGES, AS ME B 16.5
● INSPECTION AND TEST, API 598

Design description

● ONE PLE CE BODY
● LIFT TYPE
● HORIZONTAL OR VERTICAL SERVICE
● AVAILABLE WITH FLANGED ENDS

wafer lift type-plate cast steel check valve

wafer swing type-plate cast steel check valve

Applicable Standards

● STEEL CHECK VALVES, API 594/API6D
● STEEL CHECK VALVES, ISO 14313
● STEEL VALVES, AS ME B 16. 34
● FACE TO FACE, MANUFACTURE STANDARD
● END FLANGES, AS ME B 16.5
● INSPECTION AND TEST, API 598/API6D

Design Description

● ONE PLE CE BODY
● BUTTERFLY SWING TYPE
● SINGLE DISC, SHORT-PATTERN
● RENEWABLE SPLIT DISC
● HORIZONTAL OR VERTICAL SERVICE
● WAFER ENDS

wafer swing type-plate cast steel check valve

compact steeel check valve 800Lb

Applicable Standards

● STEEL CHECK VALVES, API 602
● STEEL VALVES, AS ME B 16.34
● FACE TO FACE, MANUFACTURER STANDARD
● FACE TO FACE, FLANGED, AS ME B 16.10
● END FLANGES, AS ME B 16. 5
● BUTT WELDING ENDS, AS ME B 16.25
● SOCKET-WELDING ENDS, AS ME B 16.11
● SCREWED ENDS, AS ME B 1.20. 1
● INSPECTION AND TEST, API 598

Design description

● BOLTED COVER
● CHOICE OF WB, WELDED COVER
● SEAT RINGS TYPE
● SEAT RINGS INTEGRAL WITH BODY OF LIFT
● HORIZONTAL OR VERTICAL SERVICE
● SW, SOCKET-WELDING ENDS
● SC, SCREWED ENDS
● BW, BUTT WELDING ENDS
● FLANGED ENDS

compact steeel check valve 800Lb

Live Photos

Have Questions about our valves ?

Our professional valves engineers are waiting for your consultation.

THE LATEST

Common faults of gate valves and their solutions

1. Leakage at the gate of the gate valve The packing gland is too loose to evenly tighten the nut for the compression packing gland.If the number of packing rings is not enough, the packing should be added.Fillers should be replaced with new fillers due to excessive use or improper storage. When replacing, be careful that the joints between the rings should be staggered 1200. 2. BETWEEN THE GATE VALVE AND THE SEAT SEALING SURFACE There is dirt between the sealing surfaces, which can be washed away.If the sealing surface is damaged, it should be re-ground. If necessary, it can be re-welded and processed. The grinding sealing surface must be flat and its roughness should not be less than 0.4. 3. THE LEAKAGE NUT OF THE GATE VALVE BODY AND THE BONNET JOINT IS NOT TIGHTLY TIGHTENED OR THE TENSION IS UNEVEN, AND CAN BE RE-ADJUSTED. Damage to the flange seal ...
Read More

Forged steel gate valve use characteristics and installation

FORGED STEEL GATE VALVE FEATURES The forged steel gate valve has low flow resistance. The inner medium passage of the valve body is straight through, the medium flows in a straight line, and the flow resistance is small.It is more labor-saving when opening and closing. Compared with the shut-off valve, the direction of movement of the shutter is perpendicular to the direction of flow of the medium, whether it is open or closed.High height and long opening and closing time. The opening and closing stroke of the shutter is large, and the drop is performed by the screw.The water hammer phenomenon is not easy to produce. The reason is that the shutdown time is long.The media can flow in any direction on both sides for easy installation. The gate valve channels are symmetrical on both sides.The length of the structure (the distance between the two connecting end faces of the casing) is ...
Read More

Model code of gate valve

The description of the gate valve type is based on the Chinese valve model. It does not include some of the latest gate valve products developed and produced by our company. In the case that there is no uniform standard for new products, we will adopt the enterprise preparation method of the gate valve model. However, for your convenience, versatility and standards, we will try our best to use the Chinese gate valve model. Special requirements code:body, cover bolting structure (default) Hs one, cover welding structure PS a pressure sealing structure D a low temperature valve B a bellows valve E a valve body extension end valveValve type code:Z one gate valveDrive mode code:4 a spur gear transmission 5 a bevel gear transmission 6 a pneumatic 6s a pneumatic belt manual 7 a hydraulic 9 electric (handwheel drive slightly) 9B an explosion-proof electricConnection form code:1 an internal thread 2 an external thread ...
Read More
Scroll to Top