Pneumatic V-Adjustable Ball Valve | Electric Eccentric V-Adjustable Ball Valve
ZRV type V-adjustable ball valve
ZRV type V-adjutment ball valve, a disk with V type slot, which produces sheer force with hard seal seat relative rotation to shut fiber to avoid jamming. It realizes to adjust pressure, flow, temperature, liquid level, and another parameter. It has flowability, high adjustment precision, large adjustment, good sealing, lightweight and other features. It can be used in most situations except small size, angular, three-way connection. It is best to produce instead of importing product, especially applicants to adjust mud and including fiber medium and including micron solid suspended matter. It is widely used in papermaking, sugaring, petroleum, chemical, metal, and other industry automatic control system.
Pneumatic V-Adjustable Ball Valve
Electric Eccentric V-Adjustable Ball Valve
Standard Specification
Body type: | Straight casing ball valve |
---|---|
Spool type: | V opening sphere |
Nominal size: | DN50 ~300 NPS 2〞~12〞 |
Nominal pressure: | PN16 ~40 CLASS 150LB ~300LB |
Connection: flange: | Flange FF, RF, RTJ, wafer and so on |
Packing: | V type PTFE, Flexible graphite |
Seal gasket: | Metal+graphite |
Actuator: | Pneumatic: pneumatic piston actuator, pneumatic diagram actuator Electric: DTR series, 3810 series |
Surface painting: | Green color, acrylic acid polyurethane ceramic paint. |
Model Establishment
Z | Actuator | R | Structure | Nominal pressure | Body material | Nominal diameter |
---|---|---|---|---|---|---|
Z series control valve | S: Pneumatic piston J: Pneumatic diaphragm D:Electric DTR R: Electric 3810 | R Rotary | V: Standard V-adjustment VF: Soft seal V-adjustment | PN16=16 CL150LB= 150 LB | C=WCB LC=LCB P=CF8 PL=CF3 R=CF8M RL=CF3M D=Special material | DN50= DN50 NPS2〞=NPS2〞 |
Example: Pneumatic piston V-adjustment ball valve, Pressure PN16, Body material WCB, Nominal diameter DN100, Model: ZSRV-16C DN100 |
Performance
Flow characteristic | Approximate equal percentage | |
---|---|---|
Adjustment scope | Full chamber type 200:1 | |
Rated CV | Hard seal CV 32~3700 Soft seal CV 32~3550 | |
Travel | Full open 90° | |
Allowable leakage | Hard seal: IV (0.01% Rated capacity) Soft seal: VI(Bubble level) | |
intrinsic error % | Pneumatic ±2 | Electric ±2.0 |
Hysteresis % | Pneumatic ≤1.5 | Electric ≤1.0 |
Dead zone % | Pneumatic ≤0.6 | Electric ≤1.0 |
Note :Parameters in the performance sheet are based on the control valve with positioner and PTFE packing. |
Selected parameter
Normal diameterDN(mm) | 25 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rated flow coefficient Cv | Hard seal | 32 | 78 | 90 | 160 | 250 | 360 | 610 | 1120 | 1850 | 2950 | 3700 | |||||||||||
Soft seal | 32 | 78 | 90 | 150 | 240 | 345 | 580 | 1080 | 1800 | 2800 | 3550 | ||||||||||||
Double action pneumatic actuator | Air supply pressure 400KPa | ||||||||||||||||||||||
Modle | Torque(N.M) | PTFE packing, metal seal allow different pressure Unit: MPa | |||||||||||||||||||||
ATD75 | 46.5 | 1.72 | 0.83 | 0.53 | 0.30 | 0.16 | |||||||||||||||||
ATD88 | 73.2 | 1.33 | 1.33 | 0.49 | 0.28 | ||||||||||||||||||
ATD100 | 106 | 0.48 | 0.16 | ||||||||||||||||||||
ATD125 | 221 | 0.82 | 0.45 | 0.25 | 0.19 | ||||||||||||||||||
ATD160 | 453 | 0.81 | 0.52 | 0.40 | 0.13 | ||||||||||||||||||
ATD200 | 850 | 0.9 | 0.69 | 0.60 | 0.42 | 0.31 | |||||||||||||||||
Single action pneumatic actuator | Air supply pressure 400KPa | ||||||||||||||||||||||
Model | Torque(N.M) | PTFE packing, metal seal allow different pressure Unit: MPa | |||||||||||||||||||||
ATS88 | 44 | 0.60 | 0.24 | 0.16 | 0.08 | ||||||||||||||||||
ATS100 | 60.7 | 1.10 | 0.49 | 0.31 | 0.17 | 0.08 | |||||||||||||||||
ATS125 | 126 | 1.21 | 0.79 | 0.44 | 0.25 | 0.06 | |||||||||||||||||
ATS160 | 269 | 0.56 | 0.20 | 0.10 | 0.08 | ||||||||||||||||||
ATS200 | 467 | 0.81 | 0.56 | 0.31 | 0.24 | ||||||||||||||||||
ATS240 | 880 | 0.9 | 0.69 | 0.46 | 0.24 | 0.17 | |||||||||||||||||
Electric actuator | |||||||||||||||||||||||
Model | Torque(N.M) | PTFE packing, metal seal allow different pressure Unit: MPa | |||||||||||||||||||||
3810R-10 | 100 | 1.7 | 0.5 | 0.3 | 0.16 | ||||||||||||||||||
3810R-30 | 300 | 0.48 | 0.25 | ||||||||||||||||||||
3810R-50 | 500 | 0.9 | 0.5 | 0.4 | 0.13 | ||||||||||||||||||
3810R-100 | 1000 | 0.7 | 0.38 | 0.2 |
Selected Actuator
Model / Type | Pneumatic piston Actuator | Full electric type electric actuator |
---|---|---|
AT series | 3810L series | |
Double action, single action | Built-in control box, intelligent integration | |
Usage | Adjustment, on-off | Adjustment |
Supply gas pressure or supply electric voltage | Air supply pressure(spring scope) 400 Kpa G | Power: AC 200V±10% 50Hz Or power: AC 380V±10% 50Hz |
Connector | Air tube adapter: RC1/4 | Normal type: wire intake 2-PF(G1/2〞) Exd: Installing protective sleeve PF(G3/4〞) |
Direct action | Gas pressure increase disk anti-clockwise rotation, valve close | put signal increase disk anti-clockwise rotation, valve close |
Reaction | Gas pressure increase disk clockwise rotation, valve open | Input signal increase disk clockwise rotation, valve open |
Input signal | 40~20mA.DC(with electric pneumatic valve positioner) | Input/output: 4~20mA.DC |
Lag | ≤1%FS(with positioner) | ≤0.8%FS |
Linearity | 2%FS(with positioner) | ≤+1%FS |
Working temperature | -10℃~+70℃ | Standard type: -10℃~+60℃ With spacer heater: -35℃~+60℃ Exd: -10℃~+40℃ |
Coating | Green, acrylic polyurethane enamel | Blue, acrylic polyurethane enamel |
Option parts | Electric-Pneumatic (Pneumatic-pneumatic)valve positioner, LFT, Valve position transmitter, solenoid valve, limited switch | Space heater (normal type) |
Note: Not standard configuration, need to state especially to custom |